Bluetooth BLE Wireless Driver ID Keypad — Teltonika & Queclink Compatible
NN-21382 – BLE Driver Identification Keypad
Wireless BLE Driver Identification for Fleet Vehicles
The NN-21382 is a wireless Bluetooth (BLE) driver identification keypad for fleet vehicles. Drivers enter a PIN of 4 to 14 digits and the keypad sends the Driver ID to the tracker over Bluetooth Low Energy, with no data cable to the cab.
A flexible, secure alternative to iButton keys or RFID cards, it works with the Driver Authentication feature of Teltonika and Queclink trackers and can keep the immobiliser engaged until an authorised PIN is entered.
How It Works
Driver enters a PIN of 4 to 14 digits then the * key, on the backlit keypad
The keypad transmits the Driver ID to the tracker over Bluetooth Low Energy (BLE 4.0), up to 10 m
The tracker authenticates the driver, reports to your platform and, if configured, releases the immobiliser
Key Features
Wireless BLE 4.0 communication, no data cable to the cab
Driver ID of 4 to 14 digits
No physical key, fob or card required
Backlit keypad with audible and vocal confirmation
Reverse-polarity protected
Low power draw (under 5 mA typical)
Specifications
Driver ID length: 4 to 14 digits (confirm with *)
Communication: Bluetooth 4.0 (BLE)
Communication distance: 10 m maximum
Supply voltage: 8-36 V (12V and 24V)
Current consumption: under 5 mA typical
Dimensions: 28 x 48 x 13 mm
Working temperature: -20C to 70C, cable 150 cm
Wiring
White: power supply
Brown: ground
Compatible Trackers
Works with Teltonika and Queclink tracking devices that support BLE driver authentication. If you need a wired unit that works with any GPS device supporting the 1-Wire (iButton) interface, see our 1-Wire keypads instead.
Not sure if it fits your hardware? Contact us with your tracker model and we will confirm before you order.