IP65 Wired Driver ID Keypad for Shared Fleet Vehicles

IP65 Driver Identification for Fleet Vehicles

The DC-51145 is an IP65 weatherproof driver identification keypad. Drivers enter a PIN of 4 to 14 digits, confirmed with the * key, and the keypad sends the Driver ID to the tracker over the 1-Wire (iButton) interface.

A secure alternative to iButton keys with nothing to lose or replace, it works with the Driver Authentication feature of compatible trackers, including immobiliser control where configured.

How It Works

• Driver enters a PIN of 4 to 14 digits then the * key, on the backlit keypad

• The keypad sends the Driver ID to the tracker over the 1-Wire iButton interface

• The tracker authenticates the driver, reports to your platform and, if configured, releases the immobiliser

Key Features

• 1-Wire iButton communication

• Driver ID of 4 to 14 digits, confirmed with the * key

• No physical key, fob or token required

• IP65 weatherproof rating

• Backlit keypad with audible indication

• Reverse-polarity protected, low power draw

Specifications

• Driver ID length: 4 to 14 digits (confirm with *)

• Communication: 1-Wire protocol supporting iButton

• Communication distance: 10 m maximum

• Supply voltage: 8-36 V (12V and 24V)

• Current consumption: under 5 mA typical

• Protection: IP65 weatherproof, reverse-polarity protected

• Dimensions: 73 x 46 x 17 mm

• Working temperature: -20C to 70C, cable 150 cm

Wiring

• Yellow: vehicle power supply

• Brown: vehicle ground

• Green: buzzer (tracker output)

• White: 1-Wire data to the tracker iButton interface

Compatible Trackers

Works with any GPS tracking device that supports the 1-Wire (iButton) interface. Confirmed brands: Teltonika, Queclink, Ruptela, Digital Matter and CalAmp.

Not sure if it fits your hardware? Contact us with your tracker model and we will confirm before you order.

Frequently Asked Questions