Queclink GL533CG
Queclink GL533CG IP67 LTE Cat 1 asset tracker with RF433 and BLE 5.2. Compare standby and emergency reporting modes and request a B2B quote.

Queclink GL533CG — Product and Deployment Information
The GL533CG combines cellular reporting with a separate RF433 transmitter for supported stolen-vehicle recovery workflows. Select the reporting profile, SIM service and recovery-receiver infrastructure against the project. Confirm regional suitability and BLE accessory integration before ordering.
Technical Specifications
Cellular: LTE Cat 1 FDD bands B1/B2/B3/B4/B5/B7/B8/B20/B28 with quad-band EGPRS fallback; confirm operator and supplied variant.
Regional suitability: The linked datasheet states except North America. Confirm the deployment country, bands, SIM service and approvals.
Positioning: All-in-one GNSS receiver with GPS, GLONASS, Galileo and BeiDou listed. Reception and installation affect position quality.
RF433: Built-in 433MHz transmitter for a compatible recovery system. It does not itself provide a GNSS position indoors or a complete recovery service.
Bluetooth: BLE 5.2. Confirm the exact accessory protocol, firmware and receiving-platform workflow.
Battery: Three CR123A lithium batteries; the linked document lists 1,400mAh. Follow the approved battery-service procedure.
Power-saving estimate: Up to four years at one report/day. Manufacturer conditions include LTE Cat 1, CSQ above 15, constant 25°C and strong open-sky GNSS reception.
Emergency-mode estimate: Up to 42 hours at one report/minute with RF433 on in the linked document. Actual runtime depends on configuration and conditions.
Dimensions and weight: 87 × 51 × 30 mm; 150g. Magnetic case version: 87 × 51 × 33.5 mm; 170g.
Temperature and enclosure: −20°C to +60°C; IP67 stated. Follow sealing and installation instructions.
Motion, geofences and buffer: Internal 3-axis accelerometer, up to 20 internal geofences and 10,000 buffered messages.
Interfaces and reporting: Function button, status/GNSS indicators, Micro USB configuration and @Track Pro over TCP, UDP and SMS. Confirm alert configuration and platform handling.
Approval status: The linked document marks CE and FCC as planning. Confirm current certification for the supplied hardware and destination before deployment.
Frequently Asked Questions
Does GL533CG last four years in emergency recovery mode?
No. Four years is the one-report/day power-saving estimate. The linked document lists up to 42 hours at one report per minute with RF433 enabled in emergency mode; actual runtime varies.
Does RF433 give a GPS position inside a building?
RF433 is a separate transmitter for compatible recovery-receiver equipment. It can support a recovery workflow where GNSS is obstructed, but it does not guarantee a satellite position indoors or recovery of the asset.
Is GL533CG suitable for North America?
The linked datasheet explicitly states except North America. Confirm the supplied regional model, radio bands, operator acceptance and current approvals for the deployment country.
Will every BLE accessory work with GL533CG?
BLE 5.2 alone does not establish compatibility. Confirm the accessory protocol, firmware and platform integration, including reporting and battery-use requirements.
Does the linked document confirm CE and FCC certification?
It labels CE and FCC as planning. Confirm the current certification documents for the supplied hardware revision and destination rather than treating a planned approval as a completed one.
How can I check availability and request a quote?
Request a quote with the quantity, destination, platform and RF433 requirements. We will confirm stock, pricing and dispatch timing.
Product Documentation
Specifications follow the linked manufacturer document. Confirm the supplied revision, configuration and accessories before ordering.
