Queclink GES100CG
Queclink GES100CG LTE Cat 1 bis/2G GNSS bolt seal for container tracking, with tamper alerts and IP67 housing. UK distributor; confirm project requirements.

Queclink GES100CG — Product and Deployment Information
The GES100CG combines a single-use container bolt seal with cellular GNSS reporting. Inserting the locking bolt powers on the device, with vibration feedback. Cutting the seal can trigger a tamper alarm and a change in reporting frequency. Detection and reporting support cargo monitoring; they do not make a container immune to tampering or guarantee customs acceptance.
Technical Specifications
Cellular: LTE Cat 1 bis with GSM fallback
LTE bands: B1/B2/B3/B4/B5/B7/B8/B20/B28
GSM bands: 850/900/1800/1900 MHz
GNSS: GPS, GLONASS, Galileo and BeiDou
Seal design: Single-use bolt seal; manufacturer states ISO 17712 compliance
Battery: LiMn-polymer, 3 V, 1600 mAh
Runtime condition: Manufacturer estimate of 90 days at two reports per day; actual runtime varies
Dimensions: 78 × 34 × 95 mm; total length after locking
Weight: 200 g
Ingress protection: IP67
Operating temperature: −30°C to +70°C
Message buffer: Up to 600 messages
Regional scope: EMEA and Latin America; verify operator and destination requirements
Regulatory status: Linked datasheet lists FCC, CE and Anatel as TBD; confirm current evidence before deployment
Deployment Checks
Confirm the supplied hardware revision, firmware, vehicle integration, compatible accessories, network service and tracking platform before ordering. Features depend on the actual installation and configuration.
Frequently Asked Questions
Is the GES100CG reusable?
The manufacturer describes it as a single-use electronic bolt seal. Confirm fitting, removal and disposal procedures for the intended container journey before ordering.
Does the GES100CG battery always last 90 days?
No. The manufacturer gives a 90-day estimate at two reports per day. More frequent reporting, tamper events, network conditions, positioning attempts and temperature can change runtime.
Is the GES100CG tamper-proof?
It provides tamper detection rather than a guarantee against interference. Cutting the seal can trigger an alarm and a change in reporting frequency, subject to configuration, power and network availability.
Does ISO 17712 mean the GES100CG is accepted by every customs authority?
No. The manufacturer states ISO 17712 compliance, but project acceptance and any required certification must be checked for the destination and application. The linked datasheet marks FCC, CE and Anatel as TBD; request current supporting evidence.
Which networks and regions does the GES100CG cover?
It lists LTE Cat 1 bis with GSM fallback and targets EMEA and Latin America. Check the supported bands, active network service, SIM arrangements and platform integration for the route.
How do I order GES100CG seals for a container project?
Use Request a quote with quantities, route, reporting interval, tracking platform and compliance requirements. Confirm availability, service arrangements and dispatch timing before purchase.
