Teltonika FTM164

Teltonika FTM164 — LTE Cat M1/NB-IoT Advanced GPS Tracker

The Teltonika FTM164 is an advanced GPS tracker designed for vehicle and asset monitoring on LTE Cat M1 and NB-IoT networks. It is the M1/NB-IoT variant of the FTC164, sharing the same rugged IP69K-rated housing and rich I/O capabilities while delivering extended connectivity in areas served by IoT-optimised cellular networks. The FTM164 is ideal for fleet operators and logistics providers seeking reliable tracking with low power consumption on modern LPWAN infrastructure.

Key Features

• LTE Cat M1 and NB-IoT dual-mode connectivity for wide IoT network coverage

• GNSS with GPS, GLONASS, GALILEO and BEIDOU support — up to 135 channels

• IP69K-rated enclosure — sealed against high-pressure water jets and dust ingress

• 2600 mAh internal backup battery for continued tracking after vehicle power loss

• 5 digital/analogue inputs and 4 digital outputs for peripheral integration

• 1-Wire interface for driver identification and temperature sensing accessories

• Wide voltage input range: 8–32V DC — suits cars, vans, HGVs and machinery

• Compact and lightweight: 87.75 x 106.40 x 29.70 mm, 147 g

• Supports CAN bus, RS232 and RS485 interfaces for in-vehicle data integration

• Over-the-air (OTA) firmware and configuration updates

Technical Specifications

Connectivity

• Cellular: LTE Cat M1 / NB-IoT (Quectel BG95 series module)

• GNSS: GPS, GLONASS, GALILEO, BEIDOU — 135 channels, <1.8 m CEP accuracy

• Bluetooth: BLE 4.0 (for accessories and configuration)

Inputs and Outputs

• 5 x Digital/Analogue inputs (DIN/AIN)

• 4 x Digital outputs (DOUT)

• 1 x 1-Wire interface

• 1 x RS232 serial interface

• 1 x RS485 serial interface

• CAN bus interface (vehicle data)

Power

• Operating voltage: 8–32V DC

• Internal backup battery: 2600 mAh Li-Ion

Physical

• Dimensions: 87.75 x 106.40 x 29.70 mm

• Weight: 147 g

• Ingress protection: IP69K

• Operating temperature: -40°C to +85°C

Frequently Asked Questions

What is the difference between the FTM164 and the FTC164?

The FTM164 uses LTE Cat M1 and NB-IoT connectivity, which is optimised for IoT applications with lower data rates and extended network coverage, particularly in rural and suburban areas. The FTC164 uses LTE Cat 1, which supports higher data throughput. Both devices share the same housing, I/O configuration, GNSS module and backup battery.

Is the FTM164 compatible with Teltonika Configurator?

Yes. The FTM164 is fully supported by Teltonika Configurator software for Windows. Configuration can also be performed remotely via the Teltonika Remote Management System (RMS) using OTA updates.

Can the FTM164 be used in HGVs and heavy machinery?

Yes. The wide 8–32V input voltage range, IP69K rating and extended operating temperature range make the FTM164 suitable for installation in cars, vans, trucks, HGVs, agricultural machinery and construction equipment.

Do you hold UK stock of the FTM164 and do you ship worldwide?

Contact Tracking Hardware UK to confirm current stock, dispatch time and a delivered quote for your quantity and destination. We supply B2B customers internationally.

Is the FTM164 locked to a specific platform or SIM card?

Confirm that your platform supports this exact model and its required protocol and features. Where a cellular SIM is used, the SIM plan, supported bands, operator coverage and device configuration must match the deployment.

Can the FTM164 be used with driver identification keypads?

Yes. The FTM164 can be paired with our driver identification keypads, so every journey is tied to a named driver rather than just to a vehicle.

We supply both Bluetooth and wired keypads, including IP68-rated units for trucks and outdoor plant. Tell us the vehicle type and we will recommend the right one.

Downloads and Documentation

Full documentation for the FTM164 including the datasheet, quick start guide and configuration manual is available on the Teltonika GPS Wiki: wiki.teltonika-gps.com/view/FTM164