FMM00A

Teltonika FMM00A — Teltonika's First LTE Cat M1 Plug and Play OBD Tracker with OEM Parameter Reading

The Teltonika FMM00A is a landmark product in Teltonika's range — the first plug-and-play LTE Cat M1 OBD tracker Teltonika has produced, combining low-power wide-area IoT network technology with the same OEM parameter reading capability found in the FMM003. It represents the next step in OBD telematics — bringing together effortless plug-and-play installation, genuine OEM vehicle data and future-proof LTE Cat M1 and NB-IoT connectivity in a single compact device.

Like the FMM003, the FMM00A's defining feature is OEM parameter reading — reading real odometer and real fuel level data using vehicle manufacturer PIDs rather than standard OBD-II estimates that may not match dashboard readings. The full supported vehicles and data list removes all guesswork from deployment planning, allowing telematics service providers and fleet operators to confirm exactly what data is available for each vehicle before ordering.

As an official Teltonika distributor in the UK, Tracking Hardware UK ships the FMM00A directly from our London warehouse — with trade pricing available for telematics service providers, fleet operators and resellers.

Key Features

• LTE Cat M1 and NB-IoT with 2G fallback — Teltonika's first LTE Cat M1 OBD tracker, offering low-power wide-area IoT connectivity with broad global coverage, lower power consumption and long-term network compatibility, with NB-IoT support and automatic 2G fallback

• OEM parameter reading — reads genuine real odometer and real fuel level data using vehicle manufacturer OEM PIDs, providing dashboard-accurate figures not available from standard OBD-II estimates

• Supported vehicles and data list — a full compatibility list confirms which vehicles are supported and which OEM parameters are available for each model before deployment, eliminating guesswork and reducing integration time

• Standard OBD-II data reading — reads engine RPM, engine temperature, battery voltage, throttle position, accelerator pedal position, diagnostic fault codes and other standard OBD-II parameters from the vehicle ECU

• Plug-and-play OBD-II installation — plugs directly into the standard OBD-II port with no wiring, tools or installation engineer required

• Bluetooth 4.0 + BLE — connects to Bluetooth Low Energy sensors and beacons including Teltonika EYE Beacon and EYE Sensor accessories, and supports firmware and configuration updates wirelessly

• Detailed crash detection — crash detection based on accelerometer data with configurable parameters for accurate impact recording and insurance evidence 170mAh Li-ion backup battery — maintains device operation if the OBD-II connection is interrupted

• Tow and unplug detection — generates an alert if the device is removed or the vehicle is towed

• Jamming detection — alerts when GPS signal interference is detected

• Green driving monitoring — tracks harsh braking, acceleration and cornering for driver behaviour scoring

• Excessive idling detection — monitors and alerts on prolonged engine idling for fuel cost reduction

• Geofencing and auto geofencing — configurable zone alerts and automatic geofence creation at ignition off location

• 128MB internal memory — stores up to 422,400 records when out of network coverage

• Over-the-air updates — firmware updatable remotely via FOTA Web and via Bluetooth

Driver Identification with Tracking Hardware UK BLE Keypad

The FMM00A supports Bluetooth 4.0 and is fully compatible with the Tracking Hardware UK BLE driver identification keypad. Drivers enter their unique PIN or present their card on the keypad at the start of each trip, and the driver ID is logged alongside all OEM and OBD data and GPS tracking information — giving fleet managers complete visibility of who was driving each vehicle at any given time. Contact us to discuss keypad and FMM00A bundle pricing.

FMM00A vs FMM003 — Which Should You Choose?

The FMM00A and FMM003 both support LTE Cat M1, NB-IoT and OEM parameter reading with a supported vehicles list. The FMM00A is Teltonika's first LTE Cat M1 OBD device and also specifically supports Teltonika's EYE Beacon and EYE Sensor BLE accessories. Both are excellent choices for LTE Cat M1 OBD deployments — contact us for guidance on which best suits your specific application and vehicle fleet.

Technical Specifications

Cellular: LTE Cat M1 and NB-IoT with 2G GSM fallback

GNSS: GPS, GLONASS, Galileo, BeiDou, SBAS, QZSS, DGPS, AGPS

Bluetooth: 4.0 + BLE

Interface: OBD-II plug-and-play

Backup battery: 170mAh Li-ion 3.7V

Memory: 128MB — up to 422,400 records

Power supply: OBD-II port — vehicle power

Ingress protection: IP41 Operating temperature: -40°C to +85°C

Typical Use Cases

Ideal for light commercial vehicle fleet management on LTE Cat M1 networks, car rental and leasing companies requiring accurate real odometer and fuel level data, insurance telematics and pay-as-you-drive programmes, driver logbook and hours of service recording, large-scale international fleet deployments requiring broad IoT network coverage, and any application where plug-and-play LTE Cat M1 tracking with OEM-accurate vehicle data is required.

Frequently Asked Questions

What is the difference between the FMM00A and the FMM003?

Both the FMM00A and FMM003 support LTE Cat M1 and NB-IoT with OEM parameter reading and a supported vehicles list. The FMM00A is Teltonika's first LTE Cat M1 OBD device and adds specific support for Teltonika EYE Beacon and EYE Sensor BLE accessories. Contact us for guidance on which best suits your deployment.

What is the difference between the FMM00A and the FMC001?

The FMC001 uses LTE Cat 1 for faster data speeds on standard 4G networks and adds CAN and K-Line interfaces for broader vehicle data access. The FMM00A uses LTE Cat M1 for lower power consumption and broader IoT network coverage, and adds OEM parameter reading for dashboard-accurate fuel and odometer data. The right choice depends on your network infrastructure and data requirements.

Is the FMM00A compatible with the Tracking Hardware UK BLE driver identification keypad?

Yes — the FMM00A supports Bluetooth 4.0 and is fully compatible with the Tracking Hardware UK BLE driver identification keypad. Contact us for keypad and FMM00A bundle pricing.

Does the FMM00A need a SIM card?

Yes — the FMM00A requires a SIM card with LTE Cat M1 or NB-IoT capability. It is not supplied with a SIM. Contact us for SIM recommendations for UK and international deployments.

Can I buy the FMM00A in bulk from Tracking Hardware UK?

Yes — we supply telematics service providers, fleet operators and resellers across the UK and internationally. Volume pricing and trade accounts are available. Contact us for a bulk quote.