​

Teltonika FMC003 — 4G LTE Plug and Play OBD Tracker with OEM Parameter Reading

The Teltonika FMC003 is Teltonika's most advanced plug-and-play OBD tracker — a 4G LTE Cat 1 device purpose-built for next-generation OBD applications that demand more than standard parameter estimates. Its standout capability is OEM parameter reading — the ability to read genuine real odometer and real fuel level data directly from the vehicle manufacturer's own data parameters, not estimated values calculated from OBD-II standards.

Unlike standard OBD trackers that read generic OBD-II parameters which may not always match the vehicle's actual dashboard readings, the FMC003 reads the OEM PIDs used by the vehicle manufacturer — providing the same accurate fuel level and mileage figures you see on the dashboard. To remove all guesswork from deployment planning, the FMC003 comes with a full supported vehicles and data list, so fleet managers and telematics service providers know exactly which parameters are available for each vehicle before ordering.

As an official Teltonika distributor in the UK, Tracking Hardware UK ships the FMC003 directly from our London warehouse — with trade pricing available for telematics service providers, fleet operators and resellers.

Key Features

• OEM parameter reading — reads genuine real odometer and real fuel level data using vehicle manufacturer OEM PIDs, providing dashboard-accurate figures not available from standard OBD-II parameter estimates

• Supported vehicles and data list — a full compatibility list is provided so you know exactly which vehicles are supported and which OEM parameters are available for each model before deployment — no guesswork

• 4G LTE Cat 1 with 2G fallback — fast, reliable 4G connectivity for real-time data transmission on modern UK networks, with automatic 2G fallback ensuring continuous coverage

• Standard OBD-II data reading — reads engine RPM, engine temperature, battery voltage, throttle position, accelerator pedal position, diagnostic fault codes and other standard OBD-II parameters from the vehicle ECU

• Multi-protocol OBD support — automatically detects and uses the vehicle's OBD protocol including ISO 15765 CAN, ISO 14230 KWP2000, ISO 9141-2 and J1850

• Plug-and-play OBD-II installation — plugs directly into the standard OBD-II port with no wiring, tools or installation engineer required

• Bluetooth 4.0 — connects to BLE sensors and beacons and supports firmware and configuration updates wirelessly

• 170mAh Li-ion backup battery — maintains device operation if the OBD-II connection is interrupted or the device is temporarily unplugged

• Crash detection — automatically detects and records impact events for accident evidence and insurance reporting

• Tow and unplug detection — generates an alert if the device is removed or the vehicle is towed

• Jamming detection — alerts when GPS signal interference is detected

• Green driving monitoring — tracks harsh braking, acceleration and cornering for driver behaviour scoring and eco-driving programmes

• Excessive idling detection — monitors and alerts on prolonged engine idling for fuel cost reduction Geofencing and auto geofencing — configurable zone alerts and automatic geofence creation at the ignition off location

• 128MB internal memory — stores up to 422,400 records when out of network coverage

• Over-the-air updates — firmware updatable remotely via FOTA Web and via Bluetooth

  
  

Driver Identification with Tracking Hardware UK BLE Keypad

The FMC003 supports Bluetooth 4.0 and is fully compatible with the Tracking Hardware UK BLE driver identification keypad. Drivers enter their unique PIN or present their card on the keypad at the start of each trip, and the driver ID is logged alongside all OEM and OBD data and GPS tracking information — providing complete driver accountability with no wiring required. Contact us to discuss keypad and FMC003 bundle pricing.

Technical Specifications

Cellular: 4G LTE Cat 1 with 2G GSM fallback

GNSS: GPS, GLONASS — high sensitivity receiver

Bluetooth: 4.0 + BLE Interface: OBD-II — CAN, K-Line, J1850

Backup battery: 170mAh Li-ion 3.7V Memory: 128MB — up to 422,400 records Power supply: OBD-II port — 10V to 30V DC

Operating temperature: -40°C to +85°C

Typical Use Cases

Ideal for light commercial vehicle fleet management requiring accurate real odometer and fuel level data, car rental and leasing companies needing reliable mileage and fuel monitoring, insurance telematics and pay-as-you-drive programmes, driver logbook and hours of service recording, and any application where OEM-accurate vehicle data from a plug-and-play device is essential.

Frequently Asked Questions

What is the difference between the FMC003 and the FMC001?

Both are 4G LTE plug-and-play OBD trackers with no wiring required. The FMC003's key advantage is OEM parameter reading — it reads genuine real odometer and real fuel level data using vehicle manufacturer PIDs, providing dashboard-accurate figures. The FMC001 reads standard OBD-II parameters which can differ from dashboard readings. If accurate fuel and mileage data is essential for your application, the FMC003 is the better choice.

What is OEM parameter reading?

Standard OBD-II parameters are generic values calculated using OBD standards that may not match the vehicle's actual dashboard readings. OEM parameters are the vehicle manufacturer's own data parameters — the same values used to display fuel level and odometer on the vehicle's dashboard. The FMC003 reads these OEM parameters directly, providing more accurate data for fuel monitoring and mileage reporting.

Does the FMC003 work with all vehicles?

The FMC003 works with vehicles that have a standard OBD-II port. OEM parameter reading is vehicle-dependent. Teltonika provides a full supported vehicles and data list so you can confirm compatibility before deployment. Contact us for a compatibility check on your specific vehicle fleet.

Is the FMC003 compatible with the Tracking Hardware UK BLE driver identification keypad?

Yes — the FMC003 supports Bluetooth 4.0 and is fully compatible with the Tracking Hardware UK BLE driver identification keypad. Contact us for keypad and FMC003 bundle pricing.

Can I buy the FMC003 in bulk from Tracking Hardware UK?

Yes — we supply telematics service providers, fleet operators and resellers across the UK and internationally. Volume pricing and trade accounts are available. Contact us for a bulk quote.