Teltonika EYE Sensor Mesh — Wirepas Mesh Indoor Sensor for Temperature, Humidity and Asset Monitoring at Scale

The Teltonika EYE Sensor Mesh is the most capable sensor in Teltonika's Wirepas Mesh product family — combining the full environmental monitoring capability of the EYE Sensor with the scalability and resilience of Wirepas Mesh network connectivity. Where the standard EYE Sensor transmits data directly to a nearby GPS tracker or BLE gateway, the EYE Sensor Mesh uses Wirepas Mesh technology — each device acting as both a sensor and a network relay, forwarding data from surrounding devices across the mesh until it reaches a gateway. The result is a dramatically more scalable and resilient indoor monitoring network that can cover hospitals, large warehouses, cold chain facilities and industrial complexes with only a small number of gateways.

Monitoring temperature, humidity, movement, pitch and roll angle, and magnetic door open and close events simultaneously, the EYE Sensor Mesh provides a complete picture of both asset condition and asset location across large complex indoor environments — all without the extensive gateway infrastructure that standard BLE deployments would require at the same scale. Configurations and firmware updates are pushed over the mesh network without physical access to each device, and all EYE Sensor Mesh devices can be remotely sent to hibernate mode via the mesh when not in use.

As an official Teltonika distributor in the UK, Tracking Hardware UK stocks the EYE Sensor Mesh and ships directly from our London warehouse — with trade pricing available for telematics service providers, systems integrators and resellers.

Key Features

• Wirepas Mesh technology — devices communicate with each other and relay data across the mesh network rather than broadcasting directly to a single gateway — enabling coverage of large complex indoor facilities with far fewer gateways than standard BLE sensor deployments

• Self-healing network — if any device in the mesh becomes unavailable data is automatically rerouted through alternative mesh nodes, ensuring continuous monitoring operation without single points of failure

• Tens of thousands of sensors per gateway — the mesh architecture dramatically reduces infrastructure requirements, supporting massive scale deployments across hospitals, warehouses and cold chain facilities at a fraction of the gateway cost of standard BLE systems

• Temperature monitoring — built-in high-accuracy temperature sensor monitors ambient temperature in real time — ideal for cold chain compliance, refrigerated storage monitoring and temperature-sensitive goods logistics

• Humidity monitoring — built-in humidity sensor tracks relative humidity alongside temperature for comprehensive cargo and storage condition monitoring

• Accelerometer with movement and tilt detection — built-in accelerometer detects asset movement, fall events, pitch and roll angle — alerting when cargo has been moved, dropped or tilted unexpectedly

• Magnetic door detection — magnetometer detects changes in nearby magnetic field for wireless door open and close monitoring — ideal for cold store doors, refrigeration compartments and warehouse access points without physical wiring

• IP67 waterproof and dustproof — robust casing for reliable operation in cold stores, refrigerated trailers, warehouses, logistics facilities and all-weather outdoor environments

• Up to 5 years battery life — long-life internal battery minimising maintenance across large-scale sensor deployments with thousands of devices

• Unique ID and sensor data broadcasting — each EYE Sensor Mesh broadcasts both a unique identification number and live sensor data via the mesh network

• iBeacon and Eddystone protocol support — compatible with Teltonika gateways and third-party indoor monitoring platforms

• Configure and update via mesh network — configurations and firmware updates are pushed over the mesh network without physical access to each individual sensor

• Hibernate mode — devices can be sent to hibernate via the mesh network to conserve battery during storage or non-operational periods

• Four mounting options — screws, adhesive tape, zip ties and keychain attachment for flexible deployment

EYE Sensor Mesh vs Standard EYE Sensor — Which Should You Choose?

The standard EYE Sensor uses conventional BLE advertising picked up by Teltonika GPS trackers or BLE gateways — ideal for vehicle-based cold chain monitoring, cargo condition tracking alongside fleet GPS data and moderate-scale indoor monitoring where gateway infrastructure is sufficient. The EYE Sensor Mesh uses Wirepas Mesh connectivity — the correct choice for large-scale indoor-only deployments across hospitals, warehouses, cold chain facilities and industrial complexes where the number of sensors, the complexity of the building or the cost of gateway infrastructure makes standard BLE impractical. If your deployment involves hundreds or thousands of sensors across a large multi-floor facility, the EYE Sensor Mesh is the correct solution.

EYE Sensor Mesh vs EYE Beacon Mesh — Which Should You Choose?

Both use Wirepas Mesh connectivity and share the same network architecture, scalability and self-healing capability. The EYE Beacon Mesh focuses on unique ID broadcasting, proximity detection and magnet door monitoring without environmental sensors — ideal for asset traceability and personnel tracking. The EYE Sensor Mesh adds temperature and humidity monitoring alongside movement and magnet detection — the correct choice when environmental condition data is required alongside location across the mesh network.

Technical Specifications

Connectivity: Wirepas Mesh — BLE

Sensors: Temperature, humidity, 3-axis accelerometer, magnetometer

Battery: Internal — up to 5 years

Waterproofing: IP67

Protocols: iBeacon, Eddystone, Wirepas Mesh

Mounting: 4 options — screws, adhesive tape, zip ties, keychain Configuration: Via Wirepas Mesh network and Teltonika EYE mobile app

Typical Use Cases

Ideal for large-scale cold chain warehouse temperature and humidity monitoring across multiple floors and zones, hospital cold store and medication storage monitoring across wards and pharmacy areas, industrial refrigeration and cold chain facility compliance monitoring, food distribution centre temperature logging across entire facilities, pharmaceutical cold chain monitoring requiring room-level temperature accuracy at scale, logistics hub cargo condition monitoring, large manufacturing facility asset and environment monitoring, and any indoor monitoring deployment where standard BLE gateway infrastructure cannot scale cost-effectively to the number of sensors or complexity of the facility required.

Frequently Asked Questions

What is the difference between the EYE Sensor Mesh and the standard EYE Sensor?

Both monitor temperature, humidity, movement and magnet events. The standard EYE Sensor uses conventional BLE advertising and works with Teltonika GPS trackers and BLE gateways — ideal for vehicle-based and moderate-scale deployments. The EYE Sensor Mesh uses Wirepas Mesh for large-scale indoor deployments, supporting tens of thousands of sensors with only a few gateways and providing self-healing network resilience. Choose the standard EYE Sensor for fleet-based cold chain monitoring. Choose the EYE Sensor Mesh for large-scale indoor facilities.

What is the difference between the EYE Sensor Mesh and the EYE Beacon Mesh?

Both use Wirepas Mesh connectivity. The EYE Beacon Mesh focuses on ID broadcasting and proximity tracking without environmental sensors. The EYE Sensor Mesh adds temperature, humidity, movement and magnet detection. Choose the EYE Beacon Mesh for asset traceability. Choose the EYE Sensor Mesh when temperature and environmental monitoring is required.

Is the EYE Sensor Mesh compatible with standard Teltonika GPS trackers? The EYE Sensor Mesh uses Wirepas Mesh connectivity rather than standard BLE advertising, requiring Wirepas-compatible gateways to collect data. It does not work directly with standard Teltonika GPS trackers. Contact us for guidance on gateway requirements for your specific indoor monitoring deployment.

Can I configure and update the EYE Sensor Mesh without physically accessing each device?

Yes — configurations and firmware updates are pushed over the Wirepas Mesh network without requiring physical access to each individual sensor, significantly reducing maintenance time across large deployments with hundreds or thousands of devices.

Can I buy the EYE Sensor Mesh in bulk from Tracking Hardware UK?

Yes — we supply telematics service providers, systems integrators and resellers across the UK and internationally. Volume pricing and trade accounts are available. Contact us for a bulk quote.