top of page

EYE Beacon Mesh

Teltonika EYE Beacon Mesh is a Wirepas Mesh tag for indoor asset identification and tracking. Deploy with compatible anchors, gateways and positioning software. Contact us for a B2B quote and network design advice.

Teltonika EYE Beacon Mesh — Wirepas Mesh Indoor Asset Tracker for Large-Scale Facilities


The Teltonika EYE Beacon Mesh is the most advanced member of Teltonika's EYE beacon family — a fundamentally different indoor tracking solution that uses Wirepas Mesh technology instead of standard Bluetooth Low Energy advertising. Where standard BLE beacons broadcast directly to a gateway, requiring large numbers of gateways to cover complex multi-floor facilities, EYE Beacon Mesh tags communicate with nearby anchors, which relay data through the mesh to a gateway. The result is a dramatically more scalable and resilient indoor tracking system that can support tens of thousands of tags with only a small number of gateways.


This makes the EYE Beacon Mesh the correct solution for large-scale indoor tracking deployments that standard BLE infrastructure simply cannot handle cost-effectively — hospitals tracking medical equipment across multiple wards and buildings, large warehouses managing thousands of assets across multiple floors, transport hubs tracking baggage and cargo, and industrial manufacturing facilities requiring room-accuracy location of tools and components across complex floor plans.


As an official Teltonika distributor in the UK, Tracking Hardware UK stocks the EYE Beacon Mesh and ships directly from our London warehouse — with trade pricing available for telematics service providers, systems integrators and resellers.


Key Features


  • Wirepas Mesh architecture — tags send data to nearby anchors, which relay it through the mesh to a compatible gateway and backend. Plan anchor placement, gateway coverage and reporting intervals for the site.

  • Self-healing network — traffic can use alternative available mesh paths. Coverage and resilience depend on the installed anchors, gateway connectivity and network design.

  • Scalable indoor deployments — network capacity and gateway requirements depend on reporting intervals, coverage, anchor placement and backend configuration; validate the design for the intended tag count.

  • High device density — size and test the mesh for the number of tags and reporting load at the installation.

  • Room-accuracy indoor location — mesh network topology combined with signal strength analysis enables assets to be located to room or zone level across multi-floor buildings and complex indoor environments

  • IP67 waterproof and dustproof — robust casing for reliable operation in warehouses, logistics facilities, hospitals and industrial environments

  • Battery life — manufacturer estimates at room temperature range from 2 years at 5-minute reporting to 10 years at 60-minute reporting; the default 10-minute interval is rated at 3.5 years.

  • Unique BLE ID broadcasting — each EYE Beacon Mesh has a unique identification number enabling individual asset and personnel identification

  • iBeacon and Eddystone protocol support — compatible with Teltonika gateways and third-party indoor positioning platforms

  • Configure, scan and update via Mesh network — configuration and firmware updates are pushed over the mesh network without physical access to each device

  • Configuration — configure, scan and update the tag through the Wirepas Mesh network using the supported network tools.

  • Four mounting options — screws, adhesive tape, zip ties and keychain attachment for flexible deployment on diverse assets and equipment

  • Hibernate mode — devices can be sent to hibernate via the mesh network to conserve battery during storage or non-operational periods


EYE Beacon Mesh vs Standard EYE Beacon — Which Should You Choose?


The standard EYE Beacon uses conventional BLE advertising picked up by Teltonika GPS trackers or BLE gateways — the correct choice for vehicle-based asset tracking, delivery and logistics monitoring alongside GPS trackers, and moderate-scale indoor tracking where gateway infrastructure is sufficient. The EYE Beacon Mesh uses Wirepas Mesh connectivity — the correct choice for large-scale indoor-only deployments across hospitals, warehouses and industrial facilities where the number of assets, the complexity of the facility or the need for room-accuracy location makes standard BLE gateway infrastructure impractical or too costly. If your deployment involves thousands of assets across a large multi-floor facility, the EYE Beacon Mesh is the correct solution.


Typical Use Cases


Ideal for hospital medical equipment tracking across wards, storage areas and technical rooms, large warehouse inventory and asset management across multiple floors and zones, transport hub baggage and cargo tracking in terminals and handling facilities, industrial manufacturing tool and component tracking across complex production floor layouts, logistics depot asset management for pallets, cages and equipment, pharmaceutical facility asset tracking requiring validated room-level location data, and any large-scale indoor asset tracking deployment where standard BLE gateway infrastructure cannot scale cost-effectively.


Frequently Asked Questions


What is Wirepas Mesh and how is it different from standard BLE?

Standard BLE beacons are received by a nearby compatible tracker or BLE gateway. In this Wirepas deployment, tags send data to anchors, which forward it through the mesh to a gateway. A suitable anchor and gateway network is required.


How many tags can one gateway support with EYE Beacon Mesh?

Capacity depends on reporting intervals, anchor density, coverage, gateway connectivity and backend sizing. Confirm the required tag count during network planning.


What happens if part of the mesh network goes down?

The network can reroute traffic through alternative available anchors. This depends on having adequate coverage and working gateway connectivity; it does not guarantee uninterrupted operation after every failure.


Is the EYE Beacon Mesh compatible with standard Teltonika GPS trackers? The EYE Beacon Mesh uses Wirepas Mesh connectivity rather than standard BLE advertising, so it requires Wirepas-compatible gateways rather than standard Teltonika GPS trackers to collect data. Contact us for guidance on gateway requirements for your specific indoor tracking deployment.


Can I buy the EYE Beacon Mesh in bulk from Tracking Hardware UK?

Yes — we supply telematics service providers, systems integrators and resellers across the UK and internationally. Volume pricing and trade accounts are available. Contact us for a bulk quote.



bottom of page