Queclink GV75
Queclink GV75 IP67-rated 2G GPS tracker with RS232 and 1100 mAh backup battery. Confirm local 2G service, accessories and availability.

Queclink GV75 — Product and Deployment Information
GV75 is the 2G model in the linked GV75 series brochure. It has an IP67-rated enclosure and RS232 accessory support. Check the exact model, wiring and installation environment; features described for GV75W, GV75W V2, GV75MG or GV75MG SAT must not be assumed to apply to GV75.
Technical Specifications
Cellular: 2G GSM/GPRS; 850/900/1800/1900 MHz
GNSS: u-blox All-in-One GPS receiver in the GV75 row of the linked brochure
Supply voltage: 8–32 V DC
Backup battery: Li-polymer, 1100 mAh
Dimensions: 46 × 20.5 × 102 mm as listed for the GV75 series
Weight: 100 g for GV75
Operating temperature: −30°C to +80°C for GV75
Enclosure: IP67 in the linked brochure; verify installation and connector protection
Serial interface: One RS232 port; confirm the exact harness and accessory protocol
Driver ID and temperature: Supported wired accessories and any required interface adapter must be verified
Availability: Request current stock, support and quotation; no public price supplied
Deployment Checks
Confirm the supplied hardware revision, firmware, vehicle integration, compatible accessories, network service and tracking platform before ordering. Features depend on the actual installation and configuration.
Frequently Asked Questions
Does GV75 use 4G or LTE?
The GV75 model in the linked series brochure uses 2G GSM/GPRS. GV75W and the LTE GV75MG variants are separate products. Verify the exact model and network support before ordering.
Will it work on every UK or international 2G network?
No blanket service guarantee is made. Check local 2G coverage, supported bands, SIM provisioning, roaming and operator network-closure plans for the destination.
Does GV75 have zero vehicle-battery drain?
The linked series brochure assigns its zero-current-drain feature to GV75W V2. Do not assume that claim applies to GV75; confirm the actual power mode, wiring and consumption.
Can I use a driver-ID reader or temperature sensor?
The brochure lists RS232 accessory support. Confirm the reader or sensor, any required RS232-to-1-Wire adapter, harness, firmware and platform decoding. A direct 1-Wire port or BLE keypad pairing is not established by this brochure.
Does IP67 guarantee use in any marine environment?
No universal installation guarantee is made. Check the enclosure, cable entries, connectors, mounting and intended water exposure; an IP rating alone does not establish suitability for prolonged immersion or saltwater exposure.
What is the price and can I order in bulk?
Contact Tracking Hardware UK with the quantity, destination and required accessories for current stock, dispatch time and a delivered quote. This page uses quotation pricing.
