Queclink GV75CG

Queclink GV75CG — Rugged IP67 LTE Cat 1 Tracker for Motorcycles, E-Vehicles and Heavy Machinery

The Queclink GV75CG is the LTE Cat 1 upgrade of Queclink's proven GV75 series — one of the most trusted waterproof vehicle trackers in the Queclink range, built specifically for demanding applications where standard fleet trackers cannot operate reliably. Motorcycles, scooters, electric vehicles, quad bikes, watercraft, construction equipment and heavy machinery all present unique tracking challenges — extreme vibration, exposure to water and mud, 12V and 24V and even higher voltage electrical systems, and the need for a device that draws zero power when the vehicle is parked.

The GV75CG addresses all of these challenges in a single device. IP67 waterproof and dustproof, with a wide 9-90V power input supporting everything from motorcycles to large machinery, zero power consumption technology that completely eliminates battery drain when ignition is off, a large 1,100mAh rechargeable backup battery, BLE 5.2 for wireless accessory connectivity and an RS232 serial port for external device integration — the GV75CG is one of the most capable and versatile ruggedised vehicle trackers available for the UK market.

As an authorised Queclink distributor in the UK, Tracking Hardware UK ships the GV75CG directly from our London warehouse — with trade pricing available for telematics service providers, fleet operators and resellers.

Key Features

• LTE Cat 1 with 2G fallback — reliable future-proof 4G connectivity for real-time tracking across UK and international networks with automatic 2G fallback

• IP67 waterproof and dustproof — fully sealed enclosure rated to IP67, withstanding complete temporary immersion — ideal for motorcycles, watercraft, quad bikes and outdoor machinery in all weather conditions

• Zero power consumption technology — completely eliminates battery drain when the vehicle ignition is off, ensuring motorcycles and other vehicles with smaller batteries can be left unattended for extended periods without a flat battery

• Wide 9-90V power input — compatible with 12V motorcycles and scooters, 24V commercial vehicles and higher voltage heavy machinery electrical systems — the broadest voltage range of any device in the GV75 series

• 1,100mAh rechargeable backup battery — one of the largest backup batteries in its class, maintaining full device operation and tamper alerting if vehicle power is interrupted

• BLE 5.2 — latest generation Bluetooth Low Energy for connecting sensors and accessories including temperature probes, beacons and driver identification devices

• RS232 serial port — connects to external accessories including fuel sensors, RFID readers and third-party serial devices for extended fleet monitoring

• Multiple I/O interfaces — digital inputs and outputs for ignition detection, panic button, remote immobilisation and accessory control

• Crash detection — built-in accelerometer detects impact events for accident reporting and insurance evidence

• Aggressive driving monitoring — detects and records harsh braking, acceleration and cornering for driver behaviour scoring

• Tow and motion detection — triggers alerts if the vehicle is moved without ignition

• Geofencing — up to 20 configurable zones with automatic entry and exit alerts

• Up to 10,000 buffer messages — stores data locally when out of coverage and transmits on reconnection FCC, CE and Anatel certified — comprehensive certification coverage for UK, European and international deployments

• OTA control — remote firmware and configuration management

Driver Identification with Tracking Hardware UK BLE Keypad

The GV75CG supports BLE 5.2 and is compatible with the Tracking Hardware UK BLE driver identification keypad. Drivers or riders enter their unique PIN or present their card at the start of each trip, and the driver ID is logged alongside all GPS and telematics data — providing accountability across motorcycle fleets, courier services and heavy machinery operators. Contact us to discuss keypad and GV75CG bundle pricing.

GV75CG vs GV75MG — Which Should You Choose?

Both devices share the same IP67 enclosure, zero power consumption technology, wide voltage input and I/O capabilities. The GV75CG uses LTE Cat 1 for faster data speeds on standard 4G networks — the recommended choice for UK and European deployments. The GV75MG uses LTE Cat M1 and NB1 for broader global IoT coverage — better suited for international deployments or Cat M1 network infrastructure. For UK motorcycle, machinery and e-vehicle deployments, the GV75CG is the recommended choice.

Technical Specifications

Cellular: LTE Cat 1 with 2G fallback

GNSS: GPS, GLONASS, BeiDou, Galileo

Bluetooth: BLE 5.2

Serial port: RS232

Power input: 9V to 90V DC

Backup battery: 1,100mAh rechargeable

Power consumption: Zero when ignition off

Waterproofing: IP67

Buffer: Up to 10,000 messages

Certifications: FCC, CE, Anatel

Typical Use Cases

Ideal for motorcycle fleet management and stolen motorcycle recovery, electric scooter and e-vehicle fleet tracking, delivery and courier motorcycle operator management, quad bike and off-road vehicle tracking, watercraft and marine vessel monitoring, construction and earthmoving machinery tracking in harsh outdoor environments, agricultural machinery monitoring, and any vehicle tracking application requiring a fully waterproof device with zero battery drain when parked.

Frequently Asked Questions

What is zero power consumption technology?

Zero power consumption means the GV75CG draws completely no power from the vehicle battery when the ignition is switched off. This is critical for motorcycles and smaller vehicles with limited battery capacity — ensuring the vehicle battery is never drained by the tracker during periods of inactivity, even when the vehicle is left parked for weeks.

What is the difference between the GV75CG and the GV75MG?

Both share the same IP67 housing, zero power consumption technology and features. The GV75CG uses LTE Cat 1 for faster data on standard 4G networks — recommended for UK and European deployments. The GV75MG uses LTE Cat M1 and NB1 for broader global IoT coverage. For UK deployments the GV75CG is the recommended choice.

Is the GV75CG compatible with 12V motorcycles and 24V vehicles?

Yes — the GV75CG supports a wide 9-90V power input, making it compatible with 12V motorcycles and scooters, 24V commercial vehicles and higher voltage machinery without requiring additional voltage converters.

Is the GV75CG compatible with the Tracking Hardware UK BLE driver identification keypad?

Compatibility must be checked for the exact tracker and keypad models, interface, firmware and configuration. Bluetooth support alone does not confirm BLE keypad compatibility, and wired keypads require a supported wired interface. Send us the proposed pairing for a compatibility check before ordering.

Can I buy the GV75CG in bulk from Tracking Hardware UK?

Yes — we supply telematics service providers, fleet operators and resellers across the UK and internationally. Volume pricing and trade accounts are available. Contact us for a bulk quote.

Do you hold UK stock of the GV75CG and do you ship worldwide?

Contact Tracking Hardware UK to confirm current stock, dispatch time and a delivered quote for your quantity and destination. We supply B2B customers internationally.

GV75CG