Queclink GL33CG

Queclink GL33CG — Product and Deployment Information

The GL33CG combines LTE Cat 1 reporting with a box-disguised cargo-recovery enclosure. GPS/LBS data supports remote monitoring, while RF searching requires a separate compatible receiver. Confirm the operator, platform, accessories and recovery process for your project.

Technical Specifications

• Cellular: LTE Cat 1: B1/B2/B3/B4/B5/B7/B8/B20/B28; GSM 850/900/1800/1900 MHz fallback. Confirm local operator support.

• Positioning: GNSS and cellular LBS information; reception and platform support determine location availability.

• RF detection: 433–434MHz transmitter for use with a separate compatible search receiver.

• Battery: Rechargeable 3.7V, 4,000mAh Li-Polymer.

• Dimensions and weight: 97 × 45 × 21 mm; 91g.

• Daily and hourly estimates: 40 days at one report/day and 26 days at one report/hour, with GPS/LBS on and RF433 off.

• Frequent-report estimates: 13 days at 5-minute reports with RF433 off; 7 days in the listed 1-minute emergency mode with GPS off and RF433 on.

• Runtime test conditions: LTE Cat 1, CSQ above 15, 25°C and suitable open-sky GNSS. Coverage, sensors and configuration affect results.

• Charging and configuration: USB charging and configuration interface; confirm the supplied connector and cable.

• Operating temperature: −20°C to +60°C.

• Monitoring: Temperature, motion, low-battery and jamming-related reporting; up to 20 geofences.

• Flight mode: Cellular function can be switched off while airborne. Confirm the carrier-approved shipment and configuration procedure.

• Protection and approvals: Do not assume IP67, BLE keypad support or completed approvals. Confirm the supplied version, enclosure and destination requirements against the linked document.

Frequently Asked Questions

How does GL33CG differ from GL33?

GL33CG uses LTE Cat 1 with 2G fallback and a 4,000mAh battery. GL33 is a separate 2G model with a 2,800mAh battery. Both need compatible connectivity and a configured monitoring workflow.

What is needed for GL33CG RF searching?

A separate compatible 433–434MHz search receiver and an appropriate recovery process are required. Detection range and precision depend on the environment; RF support does not guarantee a specific room-level result.

When does the GL33CG reach 40 days standby?

The linked datasheet lists 40 days at one report per day with GPS/LBS on and RF433 off, under its stated test conditions. More frequent reporting or RF emergency searching reduces runtime.

Is GL33CG automatically approved for air freight?

No. The document describes flight mode disabling cellular transmission while airborne. Confirm carrier acceptance, battery requirements and the configuration procedure for each deployment.

Can GL33CG connect to any driver identification keypad?

No universal keypad compatibility is established by the linked datasheet. Confirm a supported interface, firmware and platform workflow for the exact proposed pairing before buying a wired or Bluetooth keypad.

How can I request a trade quote and check availability?

Use Request a quote or email info@trackinghardware.co.uk with the model, quantity, destination and tracking platform. Confirm current stock, supplied accessories, connectivity and dispatch timing before ordering.

Product Documentation

Specifications follow the manufacturer document linked above. Confirm the current revision, supplied configuration and deployment requirements before ordering.