Teltonika FMB020
Teltonika FMB020 — compact 2G plug-in GPS tracker with internal antennas, Bluetooth and crash-event monitoring. Request model availability and a quote.
Teltonika FMB020 — Compact 2G Plug-and-Play GPS Tracker
The Teltonika FMB020 is a compact 2G plug-and-play GPS tracker powered through the vehicle's OBD-II socket. It uses internal GNSS and GSM antennas and Bluetooth 4.0 LE for supported wireless accessories. Its accelerometer supports crash and driving-event monitoring. The OBD connector is used for power; select a supported data-reading model when engine diagnostics or OEM fuel and odometer data are required. Check local 2G service and vehicle fitment before deployment.
Key Features
Internal antennas — integrated high-gain GNSS and GSM antennas; no external SMA connectors.
OBD-II plug-and-play — connects directly to the OBD-II port, powered by the vehicle with no additional wiring
OBD socket power — provides a convenient power connection for location and driving-event tracking, rather than engine-data reading.
2G GSM/GPRS — quad-band radio; operation requires an available compatible 2G network and SIM.
Bluetooth 4.0 LE — connects to BLE sensors and Teltonika EYE accessories for temperature, driver ID and wireless monitoring
Backup battery — 45mAh battery for supported unplug and tracking scenarios.
USB configuration — Micro-USB interface for configuration and firmware updates.
Crash detection — built-in accelerometer for impact alerts and harsh driving event logging
Geofencing and over-speeding — configurable zone and speed threshold alerts
Remote configuration — OTA firmware updates and remote configuration via FOTA Web
Technical Specifications
Connectivity
Cellular: 2G GSM/GPRS quad-band (850/900/1800/1900 MHz)
GNSS antenna: Internal high gain.
GSM antenna: Internal high gain.
Bluetooth: BLE 4.0
Tracking Data
GNSS location and speed.
Trip and movement reporting.
Driving-event monitoring from the accelerometer.
Unplug and towing detection scenarios.
Engine diagnostics require a different supported model.
Interfaces
OBD-II socket for vehicle power.
Micro-USB and Bluetooth configuration.
Power
Supply: 10–30V DC through the OBD-II connector.
Physical
Operating temperature without battery: −40°C to +85°C. Battery limits differ; see the datasheet.
Typical Use Cases
Light vehicle fleet location and journey monitoring.
Insurance telematics using location and driving-event data.
Rental and leasing fleets requiring removable plug-in installation.
Company and pool-car trip reporting.
Light commercial vehicle tracking.
Crash-event monitoring using accelerometer data.
Driver behaviour monitoring using configured movement events.
Vehicle location reporting and geofence alerts.
Supported Bluetooth sensor and beacon integrations.
Temporary and short-term fleet deployments requiring fast installation with no permanent wiring
Frequently Asked Questions
What is the difference between the FMB010 and FMB020?
Both devices plug into the OBD-II port and read vehicle data, but the FMB020 adds external SMA antenna connectors for both GNSS and GSM. This means the FMB020 can be used in vehicles with metallised windscreens or in environments with poor signal penetration where the FMB010's internal antennas would struggle. The FMB020 also provides two digital outputs versus one on the FMB010.
Does the FMB020 require any installation or wiring?
The FMB020 plugs directly into the OBD-II port and is powered by the vehicle with no additional wiring. If you use the external antenna connectors, you will need to route antenna cables from the OBD port area to the windscreen or exterior, which takes a few minutes but requires no permanent modification to the vehicle.
What can the two digital outputs on the FMB020 be used for?
The digital outputs can trigger peripherals such as a buzzer for driver alerts, an LED indicator, a relay for accessory control, or a door lock signal. They are configurable via Teltonika Configurator and can be triggered by geofence events, speed thresholds, ignition state changes or other configurable conditions.
Is the FMB020 compatible with the Tracking Hardware UK driver identification keypad?
Compatibility must be checked for the exact tracker and keypad models, interface, firmware and configuration. Bluetooth support alone does not confirm BLE keypad compatibility, and wired keypads require a supported wired interface. Send us the proposed pairing for a compatibility check before ordering.
Can I buy the FMB020 in bulk from Tracking Hardware UK?
Yes — we supply telematics service providers, fleet operators and resellers across the UK and internationally. Volume pricing and trade accounts are available. Contact us for a bulk quote.
Do you hold UK stock of the FMB020 and do you ship worldwide?
Contact Tracking Hardware UK to confirm current stock, dispatch time and a delivered quote for your quantity and destination. We supply B2B customers internationally.