Queclink GV500MA — LTE Cat M1 and NB1 Plug and Play OBD Tracker for North America

The Queclink GV500MA is a compact, easy-to-install LTE Cat M1 and NB1 OBD tracker purpose-built for the North American market — Verizon and AT&T certified and designed for reliable operation across US and Canadian LTE networks with automatic 2G fallback.

Using Queclink's unique auto-tuning GNSS antenna design with two orthogonal antennas, the GV500MA delivers best-in-class GPS performance for OBD-mounted devices — particularly valuable in challenging installation positions under the steering column where standard single-antenna OBD trackers often struggle with signal.

The GV500MA draws power directly from the OBD-II port with no wiring or installation engineer required, making it one of the fastest trackers to deploy across large North American vehicle fleets. It is important to note that the GV500MA uses the OBD port for power only — it does not read OBD data or vehicle diagnostics from the ECU. For OBD data reading including CAN bus parameters, fuel level and fault codes, the GV500MAP is the correct choice. The GV500MA is focused on delivering accurate GPS tracking, crash reconstruction data and driving behaviour monitoring in the most efficient and deployable package possible.

As an authorised Queclink distributor in the UK, Tracking Hardware UK ships the GV500MA directly from our London warehouse — with trade pricing available for insurance providers, telematics service providers, fleet operators and resellers deploying in North America.

Key Features

• Global LTE Cat M1 and NB1 with 2G fallback — unique antenna solution ensures reliable LTE Cat M1 and NB1 connectivity across North America and globally with automatic EGPRS fallback, certified by Verizon and AT&T

• Dual orthogonal GNSS antennas — two perpendicular GNSS antennas with auto-tuning design deliver best-in-class

• GPS performance for OBD-mounted devices, maintaining accurate positioning even when installed under the steering column Plug-and-play

• OBD-II installation — draws power directly from the vehicle battery via the OBD-II port, no manual charging or wiring required — installs in seconds

• Crash detection and accident data collection — built-in accelerometer detects impact events and collects detailed accident data for reconstruction and analysis, providing insurance evidence and fleet safety insights

• Driving behaviour monitoring — detects and records harsh acceleration, harsh braking, aggressive driving and other risky behaviour patterns for UBI risk assessment and driver coaching

• 60mAh backup battery — maintains device operation and sends tamper alerts if the OBD connection is interrupted or the device is removed

• Geofencing — up to 20 configurable geofence zones with automatic alerts when the vehicle enters or exits defined areas

• Motion detection — detects vehicle movement and triggers automatic alerts for tow and unauthorised movement scenarios

• Tow alarm — generates an alert if the vehicle is moved without ignition

• Low battery alarm — alerts when backup battery level falls below threshold

• Parking alarm — notifies when the vehicle moves from its parked position

• Scheduled and triggered reporting — configurable reporting intervals and event-triggered reports for flexible data management

• OTA control — remote firmware and configuration management without physical device access

  
  

The GV500MA connects to the vehicle OBD-II port for power supply only — it does not read OBD data, CAN bus parameters, vehicle diagnostics or fault codes from the vehicle ECU. If you require OBD data reading including fuel level, VIN, RPM and Diagnostic Trouble Codes alongside GPS tracking, the GV500MAP is the correct choice. Contact us for guidance on choosing the right device for your application.

Driver Identification with Tracking Hardware UK BLE Keypad

The GV500MA supports BLE 4.2 and is compatible with the Tracking Hardware UK BLE driver identification keypad. Drivers enter their unique PIN or present their card at the start of each trip, and the driver ID is logged alongside all GPS and telematics data — enabling driver accountability with no wiring required. Contact us to discuss keypad and GV500MA bundle pricing.

Technical Specifications

Cellular: LTE Cat M1 and NB1 with EGPRS fallback

GNSS: u-blox All-in-One receiver — dual orthogonal antennas — less than 2.5m accuracy

Bluetooth: BLE 4.2

Interface: OBD-II plug-and-play — power only

Backup battery: 60mAh

Certifications: FCC, Verizon, AT&T, PTCRB, CE

Market: North America — US and Canada

Operating temperature: -40°C to +85°C

Typical Use Cases

Ideal for usage-based insurance and pay-as-you-drive telematics programmes in North America, car leasing and rental companies requiring rapid plug-and-play deployment, light truck and van fleet management, breakdown assistance and roadside service tracking, dealer lot management, new driver monitoring programmes, and any North American fleet or insurance application requiring accurate GPS tracking and crash data without OBD data reading.

Frequently Asked Questions

Does the GV500MA read OBD data from the vehicle?

No — the GV500MA uses the OBD-II port for power supply only. It does not read OBD parameters, CAN bus data, fuel level or fault codes from the vehicle ECU. For OBD data reading, the GV500MAP is the correct choice.

What is the difference between the GV500MA and the GV500MAP?

Both are LTE Cat M1 OBD trackers for North America. The GV500MA uses the OBD port for power only — focusing on GPS tracking, crash detection and driving behaviour. The GV500MAP adds OBD data reading including fuel level, VIN, RPM and Diagnostic Trouble Codes from the vehicle ECU. Choose the GV500MAP if vehicle diagnostics data is required alongside GPS tracking.

What is the difference between the GV500MA and the GV500CNA?

The GV500MA uses LTE Cat M1 and NB1 for broader IoT network coverage and lower power consumption. The GV500CNA uses LTE Cat 1 bis for faster data speeds and adds BLE 5.1 plus eSIM support. Both are North American certified. Contact us for guidance on which best suits your deployment.

Is the GV500MA compatible with the Tracking Hardware UK BLE driver identification keypad?

Yes — the GV500MA supports BLE 4.2 and is compatible with the Tracking Hardware UK BLE driver identification keypad. Contact us for keypad and GV500MA bundle pricing.

Can I buy the GV500MA in bulk from Tracking Hardware UK?

Yes — we supply insurance providers, telematics service providers, fleet operators and resellers across the UK and internationally. Volume pricing and trade accounts are available. Contact us for a bulk quote.