FMC250

Teltonika FMC250 — IP67 Waterproof 4G LTE GPS Tracker with Dual CAN and 100+ EV Models

The Teltonika FMC250 is the most capable ruggedised CAN tracker in the Teltonika range — a 4G LTE Cat 1 device combining an integrated dual CAN data processor with a fully sealed IP67 waterproof and dustproof enclosure. It is the direct upgrade path from the FMB240, replacing 2G connectivity with future-proof 4G LTE while retaining all the rugged outdoor mounting capability and CAN data intelligence that makes the FMB240 such a strong choice for harsh environment fleets.

One of the most significant upgrades in the FMC250 over its predecessors is expanded electric vehicle support — over 100 EV models compared to 40 on the FMC150 and FMB240 — making it one of the most capable EV tracking devices in the Teltonika range. Combined with dual CAN channels, LV-CAN200, ALL-CAN300, J1939, FMS and tachograph data reading, 1-Wire, Bluetooth 4.0 and both micro SIM and eSIM support, the FMC250 is an exceptionally versatile device for demanding professional fleet applications across agriculture, construction, mining, heavy transport and electric vehicle fleets.

As an official Teltonika distributor in the UK, Tracking Hardware UK ships the FMC250 directly from our London warehouse — with trade pricing available for telematics service providers, fleet operators and resellers.

Key Features

• IP67 waterproof and dustproof — fully sealed enclosure rated to IP67, dust tight and protected against temporary water immersion — safe for outdoor mounting, pressure washing and operation in mud, rain and extreme conditions

• 4G LTE Cat 1 with 2G fallback — faster data transmission, lower latency and future-proof network compatibility compared to 2G trackers, with automatic 2G fallback ensuring continuous connectivity

• Dual CAN channels — two independent CAN interfaces for simultaneous reading from multiple vehicle systems, providing broader and more accurate fleet data than single-channel devices

• Over 100 electric vehicle models supported — the most comprehensive EV support in the Teltonika CAN tracker range, reading battery level, charging status, remaining range and EV-specific parameters across 100+ models

• Multi-protocol CAN support — simultaneously supports LV-CAN200, ALL-CAN300, J1939 for trucks and agriculture, FMS for commercial fleet management, and OBD-II for diagnostic data

• Tachograph data reading — reads digital tachograph data for driver hours monitoring and commercial vehicle compliance reporting

• 1-Wire interface — connects temperature sensors for cold chain and refrigerated transport monitoring and iButton for driver identification

• Micro SIM and eSIM — supports both a physical micro SIM and a built-in eSIM for flexible connectivity options across UK and international deployments

• Bluetooth 4.0 — connects to BLE sensors and supports wireless accessory integration and OBD2 diagnostics Remote immobiliser — digital output allows remote vehicle disabling via your fleet management platform

• Crash detection — built-in accelerometer detects and records impact events

• Jamming detection — alerts when GPS signal interference is detected

• Green driving monitoring — tracks harsh braking, acceleration and cornering for driver behaviour scoring

• Excessive idling detection — monitors prolonged engine idling for fuel cost reduction

• Backup battery — 170mAh Li-ion maintains device operation if vehicle power is cut

• Over-the-air updates — firmware and CAN OEM files updatable remotely via FOTA Web

Driver Id with Tracking Hardware UK 1-Wire Keypad

The FMC250 supports 1-Wire connectivity and is fully compatible with the Tracking Hardware UK 1-Wire driver identification keypad. Drivers enter their unique PIN at the start of each trip and the driver ID is logged alongside all CAN data, GPS and telematics information — giving fleet managers complete visibility of who was driving each vehicle at any given time. Particularly valuable for agriculture, construction and heavy transport fleets where driver accountability is essential. Contact us to discuss keypad and FMC250 bundle pricing.

FMC250 vs FMB240 — Which Should You Choose?

The FMC250 and FMB240 share the same IP67 waterproof housing, integrated CAN processor, LV-CAN200 and ALL-CAN300 support and harsh environment capability. The FMC250 upgrades connectivity from 2G to 4G LTE Cat 1 — delivering faster data, lower latency and future-proof network compatibility — and significantly expands EV support from 40 to over 100 electric vehicle models. For new deployments, the FMC250 is the recommended choice. If 2G coverage in your operational area is stable and cost per unit is the priority, the FMB240 remains a strong option.

Technical Specifications

Cellular: 4G LTE Cat 1 with 2G GSM fallback

GNSS: GPS, GLONASS, Galileo, BeiDou, SBAS, QZSS, AGPS — less than 2.5m accuracy

CAN interfaces: Dual CAN channels

Supported protocols: LV-CAN200, ALL-CAN300, J1939, FMS, OBD-II

EV support: 100+ electric vehicle models

SIM: Micro SIM + eSIM

Bluetooth: 4.0 BLE

1-Wire: Temperature and iButton

Power input: 10V – 30V DC

Backup battery: 170mAh Li-ion

Waterproofing: IP67

Operating temperature: -40°C to +85°C

Typical Use Cases

Ideal for agriculture and farming machinery tracking in muddy and wet environments, construction and earthmoving equipment fleet management, mining and quarry vehicle monitoring, electric vehicle fleet management requiring 100+ EV model support, mixed EV and conventional vehicle deployments, HGV operators needing tachograph and J1939 data, refrigerated transport with 1-Wire temperature monitoring, and any application requiring a fully waterproof 4G CAN tracker for outdoor or extreme environment installation.

Frequently Asked Questions

What is the difference between the FMC250 and the FMB240?

Both share the same IP67 housing and integrated CAN processor. The FMC250 upgrades to 4G LTE Cat 1 connectivity and expands EV support from 40 to over 100 electric vehicle models. For new deployments the FMC250 is the recommended choice.

What is the difference between the FMC250 and the FMC150?

The FMC250 and FMC150 share the same 4G LTE Cat 1 connectivity and dual CAN intelligence. The FMC250 adds an IP67 waterproof enclosure for outdoor and harsh environment mounting, upgrades EV support from 40 to over 100 models and adds eSIM support alongside the physical SIM slot. If your deployment involves outdoor mounting, agriculture, construction or mining, the FMC250 is the correct choice.

Does the FMC250 support electric vehicles?

Yes — the FMC250 supports over 100 electric vehicle models, reading EV-specific parameters including battery state of charge, charging status and remaining range. It is Teltonika's most capable EV-supporting CAN tracker.

Is the FMC250 compatible with the Tracking Hardware UK 1-Wire driver identification keypad?

Yes — the FMC250 supports 1-Wire connectivity and is fully compatible with the Tracking Hardware UK 1-Wire driver identification keypad. Contact us for keypad and FMC250 bundle pricing.

Can I buy the FMC250 in bulk from Tracking Hardware UK?

Yes — we supply telematics service providers, fleet operators and resellers across the UK and internationally. Volume pricing and trade accounts are available. Contact us for a bulk quote.