TopFlyTech WarriorX 100 — Long-Life Battery LTE Cat 1 Asset Tracker for Outdoor and Harsh-Environment Deployment

The TopFlyTech WarriorX 100 is a standalone, battery-powered asset tracker built for industries where hardwired power is not practical and reliability cannot be compromised. Housed in a thick, solid IP67-rated casing and powered by a replaceable long-life battery, it delivers years of continuous field operation across trailers, containers, construction plant, agricultural equipment, and high-value industrial assets. Available from UK stock and dispatched from our London warehouse.

Overview

The WarriorX 100 runs on LTE Cat 1 with fallback to GSM, connecting across a wide range of international frequency bands for reliable coverage in the UK, Europe, the Middle East, and beyond. Multi-constellation GNSS — combining GPS, Glonass, BeiDou, Galileo, and QZSS — delivers positioning accuracy under 1.5 metres CEP, with a hot start time of under one second for near-instant location acquisition.

The device ships with a 4,000 mAh non-rechargeable battery as standard, with an optional 8,000 mAh upgrade available. At one report per day, the standard battery lasts up to three years; the 8,000 mAh option extends this beyond six years. When assets go missing, the WarriorX 100 automatically switches to high-frequency SVR (Stolen Vehicle Recovery) reporting mode to support rapid recovery.

Key Features

• Long-Life Replaceable Battery — Standard 4,000 mAh or optional 8,000 mAh non-rechargeable battery; field-replaceable without replacing the unit, significantly reducing lifetime cost of ownership.

• IP67 Waterproof and Dustproof — Certified waterproof at 5 metres depth for 15 hours. Withstands rain, mud, pressure washing, and submersion, suitable for mounting inside or outside any asset.

• Flexible Reporting Interval — Configurable reporting frequency to conserve battery during normal operation, with automatic switch to high-frequency mode in SVR scenarios.

• Multi-Constellation GNSS — GPS, Glonass, BeiDou, Galileo, and QZSS with under 1.5 m CEP accuracy and hot start under one second.

• Removal Alerts — Instant tamper alert triggered when the device is detached from the asset, enabling rapid theft response.

• Easy No-Wire Installation — Mounts via magnet, screw, polyurethane adhesive, or zip tie using the included installation panel. No specialist tools or vehicle wiring required.

• Built-In Temperature Sensor — Monitor ambient conditions directly from the device with no additional accessories needed.

• Geofencing — Supports up to 64 internal geofence zones with entry and exit alerting.

• Data Security — MD5 and AES encryption over TCP, UDP, MQTT, and SMS protocols.

• FOTA Support — Remote firmware updates over the air keep the device current without on-site visits.

WarriorX 100 vs WarriorX 300 — Which Model Do You Need?

Both the WarriorX 100 and WarriorX 300 share the same rugged housing, IP67 rating, long-life battery options, and core asset tracking feature set. The key difference is network technology. The WarriorX 100 uses LTE Cat 1, offering broader band support, higher data throughput, and wider compatibility across UK and international LTE networks. The WarriorX 300 uses LTE Cat M1, an IoT-optimised protocol designed for ultra-low power consumption on Cat M1-enabled networks. If you are deploying across standard LTE infrastructure or require faster data exchange, choose the WarriorX 100. If your network operator supports Cat M1 and maximum battery efficiency is the priority, the WarriorX 300 is the better fit.

Technical Specifications

Network: LTE FDD Cat 1 B1/B2/B3/B4/B5/B7/B8/B12/B13/B17/B18/B19/B20/B25/B26/B28/B66; LTE TDD Cat 1 B34/B38/B39/B40/B41; GSM 850/900/1800/1900 MHz

GNSS: GPS, Glonass, BeiDou, Galileo, QZSS

Position Accuracy: < 1.5 m CEP

Battery: 4,000 mAh standard / 8,000 mAh optional, non-rechargeable, field-replaceable

Battery Life: Up to 3 years (4,000 mAh, 1 report/day); up to 6 years (8,000 mAh, GPS off)

Waterproofing: IP67

Operating Temperature: -30°C to +80°C

Dimensions: 82.8 × 66.9 × 35.7 mm

Weight: 160 g

Interfaces: USB Type-C; internal GNSS, cellular, and Wi-Fi antennas

Protocols: TCP, UDP, MQTT, SMS

Encryption: MD5 / AES

Geofencing: Up to 64 zones

Certifications: CE, FCC, RCM, NBTC, CITC, TDRA

FOTA: Supported

Frequently Asked Questions

Is the WarriorX 100 waterproof?

Yes. It carries an IP67 rating, certified waterproof at 5 metres depth for 15 hours. It can be mounted inside or outside any asset without concern for rain, mud, or pressure washing.

How long does the battery last?

With the standard 4,000 mAh battery reporting once per day, expect up to three years of operation. The optional 8,000 mAh battery extends this to over six years in low-frequency reporting modes. Actual battery life depends on reporting interval and GPS usage.

Can the battery be replaced in the field?

Yes. Unlike sealed trackers, the WarriorX 100 has a field-replaceable battery. You can swap in a fresh unit without replacing the tracker, reducing long-term running costs considerably.

How is the device installed?

The WarriorX 100 ships with an installation panel and mounts via magnet, screw, polyurethane adhesive, or zip tie. No wiring or specialist tools are required, making it suitable for rapid field deployment.

Does it support geofencing? Yes. Up to 64 internal geofence zones are supported, with alerts triggered on entry or exit.

What happens if the device is removed from the asset?

A removal alert is sent immediately when the device detects it has been detached, enabling a fast response to potential theft or tampering.

Do you offer bulk pricing?

Yes. We offer volume pricing for fleet operators, system integrators, and resellers. Contact us with your quantity requirements and we will prepare a tailored quote.

Is the WarriorX 100 in stock in the UK?

Yes. We hold the WarriorX 100 in stock at our London warehouse and can dispatch same or next working day to anywhere in the UK and internationally.