TFT100

Teltonika TFT100 — IP67 E-Mobility GPS Tracker for Electric Vehicles and High-Voltage Machinery

The Teltonika TFT100 is Teltonika's dedicated e-mobility and high-voltage machinery tracker — a purpose-built 2G GPS device designed to meet the unique tracking challenges of electric vehicles and heavy electric equipment that standard fleet trackers simply cannot address. Its most defining feature is the extraordinary 10-97V power input range — covering everything from light electric scooters and e-bikes on 10-12V systems through to heavy industrial electric forklifts, telehandlers, scissor lifts and electric trucks operating on 48V, 72V or even higher voltage battery systems, all in a single device variant.

Available in four interface variants — CAN, RS232, RS485 and UART — the TFT100 communicates directly with the vehicle's controller to read operational and diagnostic data. The CAN variant supports Bosch CAN Powertrain and Askoll CAN protocols natively, enabling deep integration with the most widely deployed electric forklift and e-mobility vehicle systems. IP67 waterproof, with fall down detection for tipped vehicles, 1-Wire for driver identification and temperature monitoring, and Bluetooth 4.0 for wireless accessories, the TFT100 covers the broadest range of e-mobility tracking requirements in a single compact device.

As an official Teltonika distributor in the UK, Tracking Hardware UK ships the TFT100 directly from our London warehouse — with trade pricing available for telematics service providers, fleet operators and resellers.

TFT100 Interface Variants

The TFT100 is available in four variants — each with a different communication interface. When ordering, select the variant that matches your vehicle or equipment's communication protocol:

• TFT100 CAN — for electric vehicles and machinery using CAN bus protocol, including Bosch CAN Powertrain and Askoll CAN. Supports Manual CAN, Manual J1939, Default J1939 and FLEX CAN modes for broad e-mobility vehicle compatibility.

• TFT100 RS232 — for devices and systems communicating via RS232 serial protocol. Ideal for e-mobility vehicles and industrial equipment with RS232 data ports.

• TFT100 RS485 — for industrial equipment using RS485 serial communication protocol, suitable for multi-device bus networks in warehouse and industrial environments.

• TFT100 UART — for vehicles and devices communicating via UART protocol, commonly found in e-bikes, e-scooters and lighter e-mobility systems.

Contact us with your vehicle make and model and we can confirm which TFT100 variant is the correct choice before ordering.

Key Features

• Wide 10-97V power input — covers light e-mobility vehicles on 10-12V through to heavy industrial electric machinery on 48V, 72V and higher voltage battery systems — the broadest power input range of any tracker in Teltonika's range

• IP67 waterproof and dustproof — fully sealed enclosure for warehouse, outdoor and harsh environment installation on electric forklifts, heavy machinery and all-weather e-mobility vehicles

• CAN interface with Bosch and Askoll support — direct CAN bus communication with native support for Bosch CAN Powertrain and Askoll CAN protocols for deep electric forklift and e-mobility data reading

• Multiple interface variants — CAN, RS232, RS485 and UART versions cover all major e-mobility vehicle communication protocols in a single product family

• Bluetooth 4.0 — connects to BLE sensors for temperature and humidity monitoring and driver identification accessories

• 1-Wire interface — connects temperature sensors and iButton for driver identification — compatible with the Tracking Hardware UK 1-Wire driver identification keypad

• Fall down detection — detects when a vehicle or machinery has tipped over or fallen, triggering immediate alerts for safety and incident reporting

• Tilt detection — monitors abnormal tilt angles for machinery stability alerts

• Crash detection — accelerometer-based impact detection and recording

• Tow detection — triggers alerts if the vehicle is moved without authorisation

• Jamming detection — alerts when GPS signal interference is detected

• iButton immobiliser — driver identification via iButton for vehicle access control

• Green driving and eco monitoring — tracks driving behaviour for operator safety scoring

• Excessive idling detection — monitors prolonged engine operation for energy efficiency

• Auto and manual geofencing — configurable zone alerts for warehouse areas, depots and operational boundaries

• Over 500,000 record storage — stores extensive data locally when out of coverage

• Multiple sleep modes — GPS sleep, deep sleep, ultra deep sleep and online deep sleep for optimised power management

• FOTA Web updates — remote firmware and configuration management

Driver Identification with Tracking Hardware UK 1-Wire Keypad

The TFT100 supports 1-Wire connectivity and is fully compatible with the Tracking Hardware UK 1-Wire driver identification keypad. Operators enter their unique PIN at the start of each shift and the operator ID is logged alongside all GPS and vehicle data — providing complete accountability across electric forklift fleets, warehouse equipment and e-mobility vehicle operations. Contact us to discuss keypad and TFT100 bundle pricing.

Technical Specifications

Cellular: 2G GSM/GPRS

GNSS: GPS, GLONASS, Galileo, BeiDou — internal high gain antenna — up to -165 dBm sensitivity

Bluetooth: 4.0 BLE

1-Wire: Temperature and iButton

Power input: 10V to 97V DC

Interface options: CAN, RS232, RS485 or UART — one per variant Waterproofing: IP67

Memory: Over 500,000 records

Operating temperature: -40°C to +85°C

Typical Use Cases

Ideal for electric forklift fleet management in warehouses and distribution centres, telehandler and scissor lift tracking in construction and logistics, e-scooter and e-bike fleet monitoring for shared mobility operators, golf cart and farm buggy tracking, electric boat monitoring, industrial electric machinery management in manufacturing, coffee machine and specialist equipment monitoring, and any e-mobility or high-voltage machinery application where standard fleet trackers cannot accommodate the vehicle's voltage or communication requirements.

Frequently Asked Questions

Which TFT100 variant should I order?

Select the variant that matches your vehicle's communication protocol — CAN for vehicles using CAN bus including Bosch and Askoll systems, RS232 for RS232 serial devices, RS485 for industrial RS485 bus systems, and UART for lighter e-mobility vehicles using UART. Contact us with your vehicle make and model and we can confirm the correct variant before you order.

Why does the TFT100 support up to 97V?

Electric forklifts and heavy industrial electric machinery commonly operate on 48V, 72V or higher voltage battery systems — far beyond the 10-30V range of standard fleet trackers. The TFT100's 10-97V input range ensures it works directly with these high-voltage systems without requiring additional voltage conversion hardware.

Is the TFT100 compatible with the Tracking Hardware UK 1-Wire driver identification keypad?

Yes — the TFT100 supports 1-Wire connectivity and is fully compatible with the Tracking Hardware UK 1-Wire driver identification keypad. Contact us for keypad and TFT100 bundle pricing.

Can the TFT100 read battery level and charging status from electric forklifts? Yes — via the CAN interface variant, the TFT100 reads operational data including battery level, charge status and lock status directly from compatible electric forklift controllers using Bosch CAN Powertrain and Askoll CAN protocols. Contact us to confirm compatibility with your specific forklift make and model.

Can I buy the TFT100 in bulk from Tracking Hardware UK?

Yes — we supply telematics service providers, fleet operators and resellers across the UK and internationally. Volume pricing and trade accounts are available. Contact us for a bulk quote.