Teltonika FMM880 — LTE Cat M1 Water-Resistant Battery-Mounted GPS Tracker with L1+L5 GNSS

The Teltonika FMM880 is the LTE Cat M1 version of Teltonika's FMx880 battery-mounted tracker series — the global IoT network choice from the Fast and Easy family, combining superior dual-band GNSS accuracy with broad international network coverage and ultra-fast battery-mounted installation. Where the FMC880 uses LTE Cat 1 for UK and European deployments, the FMM880 uses LTE Cat M1 and NB-IoT for broader coverage across North America, Asia Pacific, Latin America and other international markets where IoT network infrastructure is preferred.

Its standalone dual-band L1+L5 GNSS receiver — which improves tracking quality and delivers faster time to first fix compared to standard single-band trackers — achieves under 1.8 metre positioning accuracy and maintains reliable lock in urban canyons and partial-coverage scenarios. Combined with IP65 water resistance for under-bonnet installation in all weather conditions, Bluetooth LE for wireless EYE Sensor connectivity and a U-type cable for 5-minute direct battery mounting, the FMM880 is a compelling solution for international insurance telematics, fleet management and car rental programmes.

As an official Teltonika distributor in the UK, Tracking Hardware UK ships the FMM880 directly from our London warehouse — with trade pricing available for telematics service providers, fleet operators and resellers.

Key Features

• Standalone dual-band L1+L5 GNSS receiver — dedicated standalone GNSS module supporting both L1 and L5 frequency bands simultaneously for under 1.8 metre positioning accuracy, faster time to first fix and more reliable tracking in urban canyons and challenging signal environments

• LTE Cat M1 and NB-IoT with 2G fallback — broad global IoT network connectivity across North America, Europe, Asia Pacific and Latin America with NB-IoT support and automatic 2G fallback for continuous coverage

• Ultra-fast U-type cable installation — connects directly to the car battery in under 5 minutes without specialist tools or technical knowledge

• IP65 water resistant — protected against dust and water splashes for reliable under-bonnet operation in all weather conditions

• Bluetooth LE — connects to EYE Sensors for temperature, humidity, magnetic detection and movement monitoring for extended wireless monitoring capability

• 170mAh Li-ion backup battery — maintains device operation and data logging if primary battery power is interrupted or tampered with

• Crash detection — built-in accelerometer provides crash trace data for accident reporting and insurance evidence

• Tow detection — triggers alerts when the vehicle is moved without ignition

• Unplug detection — alerts when the device is disconnected from the battery

• Jamming detection — alerts when GPS signal interference is detected

• Green driving monitoring — tracks harsh braking, acceleration and cornering for driver behaviour scoring

• Over-speeding detection — alerts when configured speed limits are exceeded

• Excessive idling detection — monitors prolonged engine idling for fuel efficiency

• GNSS fuel counter — estimates fuel consumption via GNSS-based calculation

• Virtual odometer — tracks mileage for reporting and maintenance intervals

• Auto and manual geofencing — automatic geofence at ignition off plus configurable zone alerts

• Multiple sleep modes — GPS sleep, online deep sleep, deep sleep and ultra deep sleep for optimised power management

• 128MB internal memory — stores up to 422,400 records when out of coverage

• Over-the-air updates — firmware updatable remotely via FOTA Web and via Bluetooth

Driver Identification with Tracking Hardware UK BLE Keypad

The FMM880 supports Bluetooth LE and is compatible with the Tracking Hardware UK BLE driver identification keypad. Drivers enter their unique PIN or present their card at the start of each trip and the driver ID is logged alongside all GPS and telematics data — providing complete driver accountability with no wiring required. Contact us to discuss keypad and FMM880 bundle pricing.

FMM880 vs FMC880 — Which Should You Choose?

Both the FMM880 and FMC880 share the same dual-band L1+L5 GNSS receiver, IP65 water resistance, Bluetooth LE, 170mAh backup battery and U-type cable installation. The FMC880 uses LTE Cat 1 for faster data speeds on standard 4G networks — the recommended choice for UK and European deployments. The FMM880 uses LTE Cat M1 and NB-IoT for broader global IoT coverage — designed for international deployments across North America, Asia Pacific and Latin America. For UK fleet deployments the FMC880 is the correct choice. For global IoT network deployments the FMM880 is the better fit.

Technical Specifications

Cellular: LTE Cat M1 and NB-IoT with 2G GSM fallback

GNSS: Standalone L1+L5 dual-band receiver — GPS, GLONASS, Galileo, BeiDou, SBAS, QZSS, DGPS, AGPS — under 1.8m CEP — -165 dBm sensitivity — hot start under 1 second

Bluetooth: BLE

Battery: 170mAh Li-ion backup

Installation: U-type cable — battery mounted — under 5 minutes

Power input: 10V to 30V DC

Water resistance: IP65

Memory: 128MB — up to 422,400 records

Operating temperature: -40°C to +85°C

Typical Use Cases

Ideal for international insurance telematics requiring precise L1+L5 GNSS positioning across multiple global markets, car rental and leasing companies with international operations, global fleet management on LTE Cat M1 networks, delivery and courier company fleet management in international deployments, stolen vehicle recovery requiring broad international network coverage, driver behaviour monitoring and eco-driving programmes, and any application requiring superior battery-mounted GNSS accuracy on global IoT network infrastructure.

Frequently Asked Questions

What is dual-band L1+L5 GNSS and why does it matter?

Standard trackers use the L1 GNSS frequency only. The FMM880 uses both L1 and L5 simultaneously via a standalone dedicated GNSS module, delivering under 1.8 metre positioning accuracy, faster time to first fix and more reliable tracking in urban canyons. This is particularly valuable for insurance telematics and any application where precise, consistent positioning is essential.

What is the difference between the FMM880 and the FMC880?

Both share the same L1+L5 GNSS, IP65 and U-type cable installation. The FMC880 uses LTE Cat 1 for faster data on UK and European 4G networks. The FMM880 uses LTE Cat M1 and NB-IoT for broader global IoT coverage. For UK deployments choose the FMC880. For international IoT network deployments choose the FMM880.

Is the FMM880 compatible with the Tracking Hardware UK BLE driver identification keypad?

Yes — the FMM880 supports Bluetooth LE and is compatible with the Tracking Hardware UK BLE driver identification keypad. Contact us for keypad and FMM880 bundle pricing.

Can I buy the FMM880 in bulk from Tracking Hardware UK?

Yes — we supply telematics service providers, fleet operators and resellers across the UK and internationally. Volume pricing and trade accounts are available. Contact us for a bulk quote.