FMB230

Teltonika FMB230 — IP67 Waterproof 2G GPS Tracker with Flexible Inputs and Three Digital Outputs

The Teltonika FMB230 is the IP67 waterproof version of the FMB130 — combining all the flexible input configurability and three digital output capability of the FMB130 with a fully sealed IP67 enclosure built for agriculture, construction, mining and any harsh environment where standard trackers cannot reliably operate. Dust tight and protected against temporary immersion, the FMB230 can be mounted inside or outside any vehicle without concern about high-pressure water, mud or extreme dust — making it the most versatile waterproof advanced tracker in Teltonika's 2G range.

Like the FMB130, the FMB230's standout feature is its programmable first input — fully configurable in software as digital, analogue, negative or impulse — giving installers maximum flexibility across different vehicle types and sensor requirements without hardware changes. Three digital outputs allow three simultaneous DOUT scenarios such as immobiliser, buzzer and alarm lights, and the negative input capability enables connection to sensors using negative trigger signals — a significant installation advantage on many commercial vehicles — all in a device that can be pressure washed without hesitation.

As an official Teltonika distributor in the UK, Tracking Hardware UK ships the FMB230 directly from our London warehouse — with trade pricing available for telematics service providers, fleet operators and resellers.

Key Features

• IP67 waterproof and dustproof — fully sealed enclosure rated to IP67, dust tight and protected against temporary water immersion — safe for outdoor mounting, pressure washing and operation in mud, rain and extreme conditions in agriculture, construction and mining

• Programmable flexible input — first input fully configurable in software as digital, analogue, negative or impulse, reducing integration time across different vehicle types without hardware changes

• Three digital outputs — run three simultaneous DOUT scenarios including immobiliser, buzzer, alarm lights and door lock control — more output capability than any other tracker in the FMB advanced range

• Negative input capability — connects to sensors using negative trigger signals such as door sensors, seatbelt detectors and alarm buttons without additional wiring adapters Impulse input — reads pulse signals from fuel flow meters for accurate fuel consumption monitoring

• Built-in eSIM — provides an additional connectivity option alongside the standard SIM slot for flexible deployment across UK and international markets

• 1-Wire interface — connects temperature sensors for refrigerated transport and cold chain monitoring and iButton for driver identification — compatible with the Tracking Hardware UK 1-Wire driver identification keypad

• Bluetooth 4.0 — connects to BLE sensors and accessories including Teltonika EYE Beacons and EYE Sensors for tool tracking, temperature monitoring and cargo management Remote immobiliser — digital output allows remote vehicle disabling via your fleet management platform

• Crash and tow detection — built-in accelerometer triggers alerts on impact or unauthorised movement

• Jamming detection — alerts when GPS signal interference is detected

• Green driving monitoring — tracks harsh braking, acceleration and cornering for driver behaviour scoring

• Excessive idling detection — monitors prolonged engine idling for fuel cost reduction

• 170mAh Li-ion backup battery — maintains device operation if vehicle power is cut

• Over-the-air updates — firmware updatable remotely via FOTA Web

Driver Identification with Tracking Hardware UK 1-Wire Keypad

The FMB230 supports 1-Wire connectivity and is fully compatible with the Tracking Hardware UK 1-Wire driver identification keypad. Drivers enter their unique PIN at the start of each trip and the driver ID is logged alongside all GPS and telematics data — giving fleet managers complete driver accountability across harsh environment fleet deployments. Contact us to discuss keypad and FMB230 bundle pricing.

FMB230 vs FMB130 — Which Should You Choose?

The FMB230 and FMB130 share the same programmable flexible inputs, three digital outputs, negative input, impulse input, eSIM, 1-Wire and Bluetooth capabilities. The critical difference is the enclosure — the FMB230 is rated IP67 for outdoor and harsh environment installation while the FMB130 is designed for standard in-vehicle installation. If your deployment involves outdoor mounting, agriculture, construction or mining, or vehicles subject to pressure washing, the FMB230 is the correct choice.

Technical Specifications

Cellular: 2G GSM/GPRS quad-band

GNSS: GPS, GLONASS, Galileo, BeiDou, SBAS, QZSS, DGPS, AGPS

SIM: Standard SIM plus built-in eSIM

Bluetooth: 4.0 BLE

1-Wire: Temperature and iButton

Inputs: Digital, analogue, negative and impulse — configurable

Digital outputs: 3 simultaneous DOUT

Backup battery: 170mAh Li-ion

Power input: 10V to 30V DC

Waterproofing: IP67

Memory: 128MB — up to 422,400 records

Operating temperature: -40°C to +85°C

Typical Use Cases

Ideal for agriculture and farming machinery tracking in muddy and wet environments, construction and earthmoving equipment fleet management, mining and quarry vehicle tracking, forestry machinery monitoring, mixed fleet deployments requiring flexible sensor connectivity across different vehicle types, refrigerated transport with 1-Wire temperature monitoring, fuel flow meter monitoring via impulse input, driver identification programmes and any application requiring the most flexible IP67 waterproof 2G tracker available.

Frequently Asked Questions

What is the difference between the FMB230 and the FMB130?

The FMB230 and FMB130 are identical in features and capabilities — same programmable flexible inputs, three digital outputs, eSIM, 1-Wire and Bluetooth. The FMB230 adds an IP67 waterproof enclosure for outdoor and harsh environment installation. For agriculture, construction, mining and outdoor mounting the FMB230 is the correct choice.

What is the difference between the FMB230 and the FMB225?

Both are IP67 waterproof 2G trackers. The FMB225 is based on the FMB125 platform with dual SIM and RS232/RS485 interfaces for connecting professional serial sensors — suited for international fleets and fuel sensor integration. The FMB230 is based on the FMB130 platform with programmable flexible inputs, three digital outputs and negative input — suited for complex sensor installations requiring maximum I/O flexibility. Contact us for guidance on which best suits your application.

Is the FMB230 compatible with the Tracking Hardware UK 1-Wire driver identification keypad?

Yes — the FMB230 supports 1-Wire connectivity and is fully compatible with the Tracking Hardware UK 1-Wire driver identification keypad. Contact us for keypad and FMB230 bundle pricing.

Can the FMB230 run three simultaneous outputs?

Yes — three digital outputs allow three DOUT scenarios to run simultaneously — for example immobiliser, buzzer alert and alarm lights can all be active at the same time, giving significantly more vehicle control capability than single or dual output trackers.

Can I buy the FMB230 in bulk from Tracking Hardware UK?

Yes — we supply telematics service providers, fleet operators and resellers across the UK and internationally. Volume pricing and trade accounts are available. Contact us for a bulk quote.